Sunday, March 30, 2014

Where to Start



So now that the car has been picked out, the next question where do I start with this whole mess?

Originally, I was shooting for an Enthusiast that was as stock as possible so that I could run the car in stock class and stockpile a load of parts and jump right into STU with a decent start.

Well, That didn’t happen.

The car I wound up with is a Base model so it has no VLSD, and it comes with some terrible wheels and shot tires. This pretty effectively kicks me out of stock class not that it would be very fun without that diff, as ineffective as it would be.  As the car sits, it’s technically going to be in STU with the Wheel/Tire package on it.. so you could say I bought an STU car.

So I had to start somewhere, and my hand was forced a bit. Dunlop just announced they have stopped production on the ZII.. the tire i want to use. I’m not worried about next year, as they’ve already announced the ZII Star Spec, but that won’t be available until next year. If i wanted Dunlops, the only way i could be sure i could get them was to order right now. So… that happened. Pro Tip, if ordering tires from Tire Rack that are outside their recommended sizes for your car… don’t list a car. They’ll hold your order until you call them and tell them “yes, I know exactly what I want.”

It’s pointless to keep these big fat tires around without using ‘em right? So I’m going to need some wheels with which to wrap them around. Doing this on a budget, it meant it was time to order up a set of 18×11 XXR 531s and some 3mm wheel spacers.

Being I want to use them immediately, I’m going to need to be able to adjust camber beyond the factory to clear the fenders. In comes a few control arms. I ordered up a pair of Megan Racing Front Control arms and some SPC rear camber arms.

And thanks to the PPI, I know that the brake pads are pretty much shot. Definitely one of those things better done sooner than later, i ordered a full set of Hawk HPS brake pads.

Lastly, I ordered up a big Hotchkis front sway bar to help keep the wheels on the ground and reduce some of that body roll.

Next items on the list are probably going to be the coil-overs, but I’m undecided on which ones i want to buy, and keep crossing my fingers that someone will put up a good deal on some used konis or something.. Same goes for the diff, but i think I’ve got a good idea of what i want to buy.

Finding the Car

It's been a little while since I updated this. Work is going well, and I've continued to wander the internet in search of ideas and information going forward. Things are going well enough that I've had a "Fuck it" moment, and decided to just pull the trigger and buy a car, regardless of the sale status of my WRX (if you're reading this, you should buy it.)

So, I started about a month ago with the full intention of buying a car loan and down payment in hand, I decided I should be able to get what I'm looking for in the 14k mark. And off to the internet I went.

I started on the standards, Autotrader.com and Cars.com, but also branched out to the forums on enthusiast sites as well. Places like my350z.com and 350z-tech.com both offered some cars for sale, and their ads were usually quite detailed and well informed. But as I soon learned, these owners are definitely in love with their cars, and very few were motivated sellers.

The first owner I approached was through my350z.com and had gorgeous black 07 enthusiast that was a little modified, but mostly aesthetics.. stuff that was easy to remove after I made the purchase.  His initial asking price was at the upper end of my budget, but it was in budget. He wanted $13,800 for it. Upon calling, we had a discussion, and there were a few more problems that came to the surface.. an accident history, and a currently cracked windshield. He was also still driving it, so it had reached 92k miles.. getting on the higher end of the stick. As I always do, I ran the KBB on the car with the revised information.. Excellent condition it's only $11,500. Being he had stated he was already pricing on KBB (below it actually), I confronted him, and made an offer in this range. "I didn't know the value dropped that much within the past few months" was his response, holding firm on 13k.

Oh well. Can't win 'em all.

Just about every other car on those forums was modified further than I wanted to deal with. Clutch and flywheel changes are pretty frequent, and it's not surprising as it appears the car has a dual mass flywheel that can't be machined. So when it becomes time to do the clutch job, it's a lot cheaper to put a lightweight racing flywheel in instead of springing for one from the dealership.

Next up was a fun string of incorrect listings on car sale sites. Being that the 350z doesn't have different models, but packages, a lot of dealers trying to sell these cars have straight up mislabeled their cars entirely. I've seen more than a few cars labeled as Enthusiast or Touring actually be base models. This also is generally affecting their pricing.. Sure, $16k may be completely justifiable for a Touring.. but it's no where near where you should be for a base model. So I began calling dealerships that have clearly mislabeled their cars in an effort to perhaps find that diamond in the rough, and get to a place where we can negotiate a more reasonable price.

I learned quickly, dealerships don't like this.
Admitting fault or error is not really their strong point.

Finally, I hit it lucky.
A small town dealership outside Oklahoma City, OK has a base model 08, with fairly low miles, but they're right at book pricing assuming good to excellent condition, but there's no pictures. I called them Immediately, and got the lowdown. They've just gotten it on the lot, not even having pictures yet. I get some pictures emailed to me..

1239028545 1239028355 1239028459 12390287381239028888 1239028623
OK, it's a little rough, but the sales guy Jeff is very willing to work with me.. something that's very appreciated. He's first to point out some scratches, rock chips, and a dent. While I came back with the info that the tires are mismatched, and the ones on the rear are the wrong size (say nothing about those wheels.. ugh). I said thanks, and began doing some of my own research... and then it hit me.

Google the VIN.

How did I never think of this before? One search and I had some history of the car. Looks like it had lived in New York, and wound up moving to OK by way of auction. I also found a free carfax that a dealership had posted along the way, and lastly, oh my... the vehicle condition report from the auction house in Oklahoma City where Jeff had bought the car, complete with images and descriptions of any damage. Bingo. I had all the information I'd ever want.

Armed with as much if not more info than Jeff had about the car, I called him back and made him an offer, pending the results of a pre-purchase inspection (PPI) to be completed by a Nissan dealership in the area. We went back and forth a bit, and came to a number both of us could be happy with. The deal was ready to be done.

A few days later the PPI report came back with only 2 reported mechanical issues.. low brake pads (My friends at Hawk would be rectifying this anyway) and a shot windshield washer pump. Neither of these being a big deal, I called Jeff back and made my deposit, and booked a flight for a little under two weeks later.

And that's where I sit today. I'm flying out Friday to pick the car up and drive back to Minnesota.